Nghi Son Iron and Steel Factory is invested by Nghi Son Iron and Steel Joint Stock Company, with total investment of over VND 3,000 billion.

Tenova and Danieli Group – the two most famous steelmaking equipment manufacturers and suppliers in Italy have become partners to supply equipment for 1 million tons of steel billet production line per year of Gang Joint Stock Company. Nghi Son steel (NIS). Contract signing ceremony between NIS and Tenova and Danieli took place on June 18, at Saigon Legend Hotel (HCMC).

Mr. Nguyen Bao Giang, Chairman-General Director of Nghi Son Iron and Steel Joint Stock Company and 2 partners on the signing table

Modern production lines

Nghi Son Iron and Steel Plant is invested by Nghi Son Iron and Steel Joint Stock Company, with a total investment of over VND 3,000 billion, including a steel furnace with a capacity of 120 tons / batch and a seaport system of loading capacity. 2 million tons / year, located in the metallurgical industrial zone of Nghi Son Economic Zone – Thanh Hoa. In order to meet the modern criteria, save energy and protect the environment, the selection of technology as well as the supplier of steel production equipment is an important factor for the success of the project. After nearly 2 years of studying and working with European equipment suppliers, after a comprehensive evaluation of experience, technology level and criteria, NIS decided to choose a supplier. The main equipment is Tenova and Danieli Company – 2 Italian equipment manufacturing companies, with experience and leading capacity in supplying equipment for the steel industry in the world.

With the selection of consteel technology for steel smelter, it will meet many criteria that green industry, energy saving. This is the exclusive technology of Tenova Company. Raw materials are continuously loaded through the conveyor belt drying system with the working mode of creating foam covered metal slag, embedded in liquid steel tank so limiting the cause of loud noise or metal splashes. This significantly reduces the impact of arc on the grid quality, a very high demand of the power industry for steel mills. At the same time greatly improve working conditions for steelworkers. Utilizing the heat of the flue gas for drying materials allows to achieve power consumption at electric furnace below 350 Kwh / ton, contributing to a significant reduction in product cost. High-speed casting technology up to 5m / min, fully automatic control from pouring steel to stop casting, allowing workers to operate the device easily, safely and with high stability.

Mastering domestic embryos

According to the Vietnam Steel Association (VSA), domestic steel production has now met most of the demand for steel production. However, many businesses still choose to import embryos from abroad because the quality of domestic steel production is not equal to imports. Production technology has not yet advanced is one of the causes of domestic steel billet has not convinced steel manufacturers to choose to buy internal embryos. Currently, there are about 20 steel billet manufacturing enterprises nationwide, with a capacity of about 6 million tons / year. Steel supply capacity of Vietnamese enterprises has grown strongly in recent years. From the country, it is necessary to import 80% of overseas embryo materials for domestic production, so far, domestic enterprises have supplied 70% of the market demand.

Attending and speaking at the signing ceremony, Mr. Le Duong Quang, Deputy Minister of Industry and Trade, said that from 2006 until now, Vietnam’s steel industry has made rapid development steps with many investors. foreign and foreign interest and investment. Therefore, domestic steel production and consumption output increased by an average of 30% per year. In 2006 about 3.6 million tons by 2010 reached about 8.2 million tons / year. The amount of steel imported must also increase significantly by about 20% per year.

NIS’s investment in a billet production project of 1 million tons / year will contribute to reducing trade deficit in the near future. After 2 years of implementation, when the project comes into operation in April 2013, it will contribute to balance the supply and demand of Vietnam’s steel market, reduce the trade deficit for the steel industry, contributing significantly to the state budget. and bring economic development to the region to create thousands of jobs for local children in Thanh Hoa province.

Steel Builder is honored to be for this project. With the direction, we commit: the best Design and Erection, good at produce quality and beyond the schedule, finish and handover for the client on the best time and quality as we can.



N7 Street, Phu My 2 Industrial Zone, Phu My Ward, Phu My Commune, Ba Ria - Vung Tau Province, Viet Nam.

Tel: (+84) 25.4389.0998     

Tax code: 3502315915


65 Pham Ngoc Thach Street, Ward 6, District 3, Ho Chi Minh City, Viet Nam.

Tel: (+84) 28.3990.1888






Contact Person : Mr. Sai Yee - Country Manager
Address : No. 62, 6th Floor (B) Shangone Street, Manigone Sanchaung Township
Email address :
Phone : (+95) 9664 289 091 & (+95) 9403 413 102


Contact Person : Mr. Zaldy Mercado - Country Manager
Address : Penthouse A1 Alabang Business Tower 1216 Acacia Ave.,
Madrigal Business Park Alabang, Muntinlupa City
Email address :
Phone : (+63) 9159 638 982 & (+63) 9189 212 577



Contact us for more information